Product Name: Sinopec Synthetic Grease
Supplier: SINOPEC Corporation
Address: 22 Chaoyangmen North Street, Chaoyang District, Beijing, China
Emergency Contact Number: +86 10 5996 0028
Intended Use: Industrial lubricant for automotive and machinery applications
Synonyms: Synthetic grease, lithium complex synthetic
Product Code: Refer to packaging label
Recommended Restrictions: Not for food processing or medical use
GHS Classification: Not classified as hazardous under GHS regulations
Signal Word: None
Hazard Statements: May cause mild skin irritation; avoid contact with eyes; used oils can harm environment
Precautionary Statements: Avoid prolonged or repeated skin contact, prevent release to environment, use mechanical ventilation in poorly ventilated areas
Label Pictograms: None
Other Hazards: Heated product may cause thermal burns, avoid breathing fumes from overheating
Health Hazards: Long term exposure could dry out skin; contaminated clothing may cause irritation
Ingredient: Synthetic base oils (Polyalphaolefin, CAS 68649-12-7, typically 50-90%)
Thickener: Lithium complex soap (10-25%)
Additives: Antioxidants, corrosion inhibitors, extreme pressure agents, metal deactivator, proprietary performance additives (less than 10% combined)
Hazardous Components: None at rated concentrations; no ingredients individually classified as carcinogenic or toxic by OSHA, IARC, ACGIH
Impurities: Does not contain purposely added PCBs, Naphthalenic oils, heavy metals, or persistent organic pollutants
Inhalation: Remove source of exposure, take affected individual to fresh air, seek medical attention if symptoms persist or worsen
Skin Contact: Wash affected skin thoroughly with soap and water, remove contaminated clothing and wash before reuse, medical advice recommended for persistent rash or irritation
Eye Contact: Rinse with plenty of water for at least 15 minutes, hold eyelids open, seek immediate medical attention if irritation develops
Ingestion: Rinse mouth, do not induce vomiting, small ingestion unlikely to cause harmful effects, medical attention recommended if more than a small amount is swallowed or if symptoms develop
Note to Physicians: Treat symptomatically, no specific antidote identified
Suitable Extinguishing Media: Carbon dioxide, foam, dry chemical, or water fog, use water jet for larger fires only to cool adjacent surfaces
Unsuitable Extinguishing Media: Do not use direct water stream as this may spread burning material
Specific Hazards: Product can burn if heated above flash point, may emit irritating fumes such as carbon oxides, metallic compounds upon decomposition
Protective Equipment: Wear full protective gear including self-contained breathing apparatus to avoid inhalation of fumes
Firefighting Instructions: Keep containers cool with water spray to prevent rupture, avoid runoff contacting drains, evacuate non-emergency personnel from area
Personal Precautions: Wear suitable gloves and safety goggles, prevent skin contact, provide adequate ventilation
Spill Response: Stop leak if possible without risk, dike area to prevent spreading, collect spilled material with inert absorbent such as sand or earth, shovel into labeled waste containers
Environmental Precautions: Prevent entry into sewers, waterways, or soil, notify authorities if substantial release occurs threatening the environment
Cleaning Methods: Use suitable absorbents, clean affected area thoroughly with detergent and water after initial removal, dispose of contaminated materials in accordance with local regulations
Safe Handling: Wash hands thoroughly after handling, avoid contact with eyes or prolonged skin contact, keep away from heat sources and open flames, use only in well-ventilated areas, avoid generating aerosols or fine mists
Storage Conditions: Store in original containers tightly closed, keep in a cool dry place out of direct sunlight, prevent exposure to extreme temperatures or moisture, segregate from food, drinks, and incompatible materials such as strong oxidizers
Incompatible Materials: Avoid storage near acids, oxidizing agents, and strong reducing agents
Special Requirements: Discard unused product and empty containers safely, apply appropriate labeling to all containers
Exposure Limits: No OSHA or ACGIH permissible exposure limits have been established for ingredients in this product under normal conditions, monitor airborne concentrations in case of mist or aerosol formation
Engineering Controls: Provide local exhaust or general ventilation to maintain vapor or aerosol levels below nuisance limits
Personal Protection: Wear suitable gloves (nitrile, PVC), protective safety glasses or goggles, long-sleeved protective clothing if handling large amounts
Hygiene Measures: Avoid eating, drinking, or smoking while using the product, wash hands and exposed skin after handling
Respiratory Protection: Not generally required under anticipated use, apply suitable NIOSH-approved respirator if ventilation is inadequate
Appearance: Smooth, translucent grease, various colors (typically light amber or blue)
Odor: Mild petroleum odor
Odor Threshold: Not determined
pH: Not applicable (non-aqueous material)
Melting/Freezing Point: Drop point typically above 220°C
Boiling Point: >300°C (base oils)
Flash Point: >200°C (COC)
Evaporation Rate: Negligible
Flammability: Not classified as flammable, product can ignite if heated intensely
Explosive Limits: Not relevant for grease products
Vapor Pressure: Extremely low at ambient conditions
Vapor Density: Not available
Relative Density: 0.89-0.95 g/cm³
Solubility: Insoluble in water, soluble in many hydrocarbons
Partition Coefficient (n-octanol/water): Not available
Auto-ignition Temperature: >350°C
Decomposition Temperature: No data
Viscosity: Consistency NLGI 1-3 depending on grade
Chemical Stability: Stable under normal handling and storage conditions
Reactivity: Inert in most conditions, avoid contact with strong oxidizers
Possible Hazardous Reactions: No dangerous reactions known under normal use
Conditions to Avoid: Prolonged exposure to high temperatures, open based flame, contact with strong acids or oxidizing agents
Decomposition Products: At elevated temperatures, produces irritating or toxic fumes including CO, CO₂, metal oxides
Polymerization Hazard: Does not polymerize spontaneously or violently
Acute Toxicity: Low acute toxicity by oral or dermal routes, estimated LD50 (oral, rat) > 5000 mg/kg (base oils)
Skin Corrosion/Irritation: May cause mild irritation on repeated or prolonged contact
Eye Damage/Irritation: Mechanical irritation possible, not expected to produce lasting injury
Respiratory Sensitization: Not expected under normal handling
Skin Sensitization: Low risk of sensitization, rare reports of allergic contact dermatitis
Carcinogenicity: No components listed as carcinogenic by NTP, IARC, ACGIH
Germ Cell Mutagenicity: No evidence of mutagenic effects
Reproductive Toxicity: Insufficient data suggests no reproductive hazards
Chronic Effects: Frequent exposure may de-fat skin leading to dryness or cracking; used grease may present additional unspecified risks due to accumulated contaminants
Other Information: Used oils and greases may contain hazardous contaminants based on use history, handle used material with caution
Ecotoxicity: Not expected to cause acute harm to aquatic life at typical concentrations, base oils show low aquatic toxicity
Persistence and Degradability: Major components are biodegradable over extended periods; additives may persist longer in environment
Bioaccumulative Potential: Some base oil components may bioaccumulate, data limited for finished grease
Mobility in Soil: Grease structure limits environmental mobility, insoluble and expected to remain at surface or near point of release
Other Adverse Effects: Avoid uncontrolled release, used lubricants may present greater environmental hazards
Regulatory Statements: Product not listed by major international conventions as persistent, bioaccumulative, and toxic, but release to water or soil best avoided
Waste Disposal Methods: Dispose of contents and empty packaging in accordance with local, regional, and national regulations, treat as used oil or industrial waste
Recommended Treatment: Preferred disposal in chemical or hazardous waste facility, incineration suitable for small quantities
Recycling Guidance: Recycle used grease and packaging wherever possible; collection by certified waste handler important
Environmental Precautions: Avoid discharge into water bodies or soil, do not drain into sewers, landfills only in compliance with applicable rules
UN Number: Not regulated for transport
Proper Shipping Name: Not regulated
Transport Hazard Class: Not classified as hazardous for ADR, RID, IMDG, IATA
Packing Group: Not applicable
Marine Pollutant: Not classified
Special Precautions for User: Protect containers from physical damage and extreme temperatures during transport, ensure packaging integrity to prevent spills
Safety, Health, and Environmental Regulations: Product complies with China GB standard, REACH regulation (EU), does not contain reportable substances under SARA Title III (US), no known California Proposition 65 chemicals in fresh product
Labeling Requirements: Product labeling includes identification, hazard advice, supplier details, precautionary instructions
Inventories: All major components appear on China IECSC, TSCA (US), EINECS (Europe) lists
Other Regulations: Packaging and waste managed according to local and national waste control, workplace exposure guidance follows occupational health standards
