Product Name: Sinopec EP 00 Grease
Product Code: EP 00
Supplier: China Petroleum & Chemical Corporation (Sinopec)
Intended Use: Lubricating grease for industrial and automotive applications
Contact Details: Sinopec Headquarters, 22 Chaoyangmen North Street, Chaoyang District, Beijing, China
Emergency Contact: National Poison Control Center or local emergency number
Synonyms: Lithium-based semi-fluid grease
Recommended Restrictions: Not for use near open flames or at extreme temperatures outside product specifications
GHS Classification: Not classified as hazardous under GHS criteria
Main Hazards: Slight eye irritation possible, prolonged skin contact may cause irritation, ingestion may be harmful, inhalation of vapors under high temperature may cause respiratory discomfort
Signal Word: None required
Hazard Statements: None for normal use
Precautionary Statements: Avoid contact with eyes and skin, wash thoroughly after handling, avoid ingestion
Other Hazards: Spilled product creates slip hazard
Chronic Effects: None expected with proper use and hygiene
Base Oil: Highly refined mineral oil (CAS: 64742-65-0), 70-90%
Thickener: Lithium 12-hydroxystearate (CAS: 7620-77-1), 5-15%
Additives: Extreme pressure additives, anti-oxidants, rust inhibitors, proprietary blend, 1-10%
Hazardous Ingredients: No hazardous substances present at reportable concentrations
Impurities: None known that affect classification
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present, seek medical attention if irritation persists
Skin Contact: Wash skin thoroughly with soap and water, remove contaminated clothing and footwear, launder before reuse
Inhalation: Move to fresh air, keep comfortable for breathing, seek medical attention if respiratory discomfort occurs
Ingestion: Rinse mouth, do not induce vomiting, seek immediate medical care
Most Important Symptoms: Eye irritation, mild skin redness, nausea if ingested
Immediate Medical Attention: Required for eye contact, ingestion, or if symptoms persist
Flammability: Product can burn when heated above flash point
Suitable Extinguishing Media: Foam, dry powder, carbon dioxide, water spray
Unsuitable Extinguishing Media: Direct water jet may spread burning material
Hazardous Combustion Products: Carbon dioxide, carbon monoxide, aldehydes, smoke and soot
Protective Equipment for Firefighters: Self-contained breathing apparatus, full protective clothing
Firefighting Guidance: Move containers from fire area if possible, cool containers with water spray
Special Fire Hazards: Spilled product may reignite after fire is extinguished; vapors may form explosive mixtures with air at high temperature
Personal Precautions: Avoid skin and eye contact, wear suitable personal protection
Environmental Precautions: Prevent entry into sewers, waterways, and soil
Cleanup Methods: Contain spill with sand or earth, scoop into labeled containers for disposal
Small Spills: Wipe up with absorbent material
Large Spills: Dike area, collect material, dispose according to regulations
Decontamination: Wash spill area with detergent and water after removal
Reporting: Notify local environmental authorities if release contaminates watercourses or soil
Handling Precautions: Use with adequate ventilation, avoid repeated or prolonged skin contact, avoid contact with eyes, keep away from ignition sources
Hygiene Measures: Do not eat, drink, or smoke while handling, wash hands after use
Storage Conditions: Store in cool, dry, well-ventilated area, away from heat, sparks, and open flame
Incompatible Materials: Strong oxidizers, acids
Packaging: Keep containers tightly closed when not in use, use original containers
Maximum Storage Temperature: 40°C
Shelf Life: Up to sixty months under appropriate conditions
Control Parameters: No occupational exposure limits established for main components
Engineering Controls: Ensure adequate ventilation, local exhaust in confined areas
Personal Protection: Safety glasses or goggles, chemical-resistant gloves, protective clothing
Respiratory Protection: Not required during normal use; use approved respirator if aerosol formation or fumes occur
Skin Protection: Wear suitable gloves for prolonged or repeated contact
Eye Protection: Use safety glasses with side shields
Environmental Exposure: Avoid release to the environment, use proper disposal methods
Appearance: Smooth, semi-fluid, light brown grease
Odor: Mild petroleum
Odor Threshold: Not determined
pH: Not applicable
Melting Point: 160°C (approximate drop point)
Boiling Point: Not applicable
Flash Point: >200°C (base oil)
Evaporation Rate: Negligible
Flammability: Not classified as flammable under normal conditions
Vapor Pressure: Negligible
Density: 0.88-0.92 g/cm³
Solubility (Water): Insoluble
Auto-ignition Temperature: >250°C
Viscosity: Semi-fluid texture, NLGI grade 00
Stability: Stable under recommended storage and use
Reactivity: Not chemically reactive under normal conditions
Conditions to Avoid: Heat, flames, ignition sources, strong oxidizing agents
Incompatible Materials: Strong acids, alkalis, oxidizers
Decomposition Products: At elevated temperatures, emits carbon monoxide, carbon dioxide, hydrocarbons
Polymerization: Does not occur
Other Data: Product may thicken or separate under extreme conditions
Routes of Exposure: Skin contact, eye contact, ingestion, inhalation of heated fumes
Acute Toxicity: Low acute toxicity, no expected adverse effects under normal use
Skin Irritation: Slight irritant with prolonged or repeated contact
Eye Irritation: May cause mild, transient irritation
Inhalation: High vapor concentrations may cause mild respiratory irritation
Ingestion: May cause nausea, diarrhea if large amounts are swallowed
Chronic Effects: Prolonged exposure may defat skin, no systemic effects expected
Carcinogenicity: Components not listed as carcinogenic by IARC, NTP, OSHA
Sensitization: Not expected
Ecotoxicity: Not expected to be acutely toxic to aquatic organisms, but harmful effect possible with large spills
Persistence and Degradability: Base oil component degrades slowly in environment
Bioaccumulation: Potential for bioaccumulation exists for base oil fractions
Mobility in Soil: Low mobility, product forms film on surfaces
Other Adverse Effects: Prevent entry into drains, soil, or waterways to avoid long-term contamination
Waste Disposal: Dispose of material and container according to local, national, or regional regulations
Methods: Recycle whenever possible, if not feasible, use authorized chemical waste disposal
Container Disposal: Empty containers retain product residue, observe precautions, do not puncture or incinerate
Environmental Precautions: Do not pour into drains, watercourses, or soil
Waste Codes: Consult local waste authority for proper classification
UN Number: Not regulated
UN Proper Shipping Name: Not classified as dangerous goods for land, sea, or air transport
Transport Hazard Class: None
Packing Group: None
Marine Pollutant: Not classified as marine pollutant
Special Precautions: Package to prevent leakage, keep away from foodstuffs and feed
Label Requirements: None required under ADR, IMDG, IATA
Inventory Status: All ingredients listed in major international inventories (TSCA, EINECS, DSL, etc.)
Labeling Requirements: Not subject to labeling under GHS/CLP
Occupational Safety Regulations: Comply with national occupational health and safety requirements
Chemical Safety Assessment: Not required for mixtures not hazardous
Restrictions: None known beyond those related to industrial grease use
Other Regulations: Observe all local, regional, and national environmental regulations
