Product Name: Sinopec All Lithium Greases
Synonyms: Multi-purpose lithium-based grease
Manufacturer: Sinopec Corp.
Recommended Use: Lubrication of machinery, automotive, bearings, and general industrial equipment
Supplier Contact Information: Emergency telephone and address details provided on packaging and safety sheet
Product Code: Listed on product packaging
Emergency Phone: Available 24/7 via manufacturer/emergency response lines
GHS Classification: Not classified as hazardous according to GHS criteria
Route of Exposure: Eye contact, skin contact, inhalation of mist/vapors, ingestion
Signal Word: None required
Main Hazards: May cause mild skin or eye irritation, avoid prolonged exposure, ingestion may lead to gastrointestinal upset
Pictograms: None required for non-hazardous lubricating greases
Precautionary Statements: Use with good industrial hygiene practices, avoid contact with eyes and skin, do not ingest, keep away from children
Main Components: Highly refined mineral oil (60-90%), lithium soap thickener (5-20%), performance additives (1-10%)
CAS Numbers: Base oil mixture (varied), lithium 12-hydroxystearate (7620-77-1) or similar lithium compounds
Impurities: Trace heavy metals kept below regulatory limits
Additives: Antioxidants, anti-wear agents, rust inhibitors, each present in minimal or manufacturer-specified concentrations
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present, seek medical help if symptoms persist
Skin Contact: Wash with soap and water, remove contaminated clothing and shoes, seek medical attention if irritation occurs
Inhalation: Move to fresh air, provide oxygen or artificial respiration if needed, seek medical assistance if symptoms develop
Ingestion: Do not induce vomiting, rinse mouth, drink water, get medical attention if discomfort continues
Notes for Doctor: Treat symptomatically, no specific antidote known
Extinguishing Media: Dry chemical, carbon dioxide, foam, water spray (not water jet)
Special Hazards: Forms hazardous combustion products including CO and CO2, possible small amounts of metal oxides and organic fumes
Protective Equipment: Firefighters need self-contained breathing apparatus, protective clothing to avoid inhalation and skin exposure
Advice: Keep containers cool using water spray, prevent runoff from contaminating water sources
Personal Precautions: Wear protective gloves, goggles, avoid direct contact, ventilate area
Environmental Precautions: Prevent product from entering drains, waterways, soil
Cleanup Methods: Contain spillage, absorb with inert material (e.g., sand, earth), collect into labeled containers for disposal, clean residue with detergent and water
Disposal: Follow local, regional, and national regulations, avoid entry into environment
Safe Handling: Use only in well-ventilated areas, avoid breathing vapor or mist, handle with care to avoid spillage
Protection: Wash hands before eating, drinking, or smoking, do not wear contaminated clothing
Storage Conditions: Store away from direct sunlight and moisture, temperature range 0°C to 40°C, keep containers tightly closed in a dry, well-ventilated place
Incompatibility: Strong oxidizing agents, acids, bases; avoid storage near food or beverages
Permissible Exposure Limits: Mineral oil mist: OSHA PEL 5 mg/m³ (8 Hr TWA), ACGIH TLV 5 mg/m³ (8 Hr TWA)
Engineering Controls: General ventilation recommended; local exhaust where mist is generated
Personal Protective Equipment: Safety glasses with side-shields, nitrile or PVC gloves, protective work clothing
Respiratory Protection: Not usually needed, use approved respirator if airborne concentrations exceed exposure limits
Hygiene Measures: Wash exposed skin thoroughly after handling, avoid ingestion, do not smoke during use
Appearance: Semi-solid grease, color varies (light brown, amber, red, blue depending on grade)
Odor: Mild petroleum odor
pH: Not applicable
Melting Point/Drop Point: 170°C - 200°C (varies by grade)
Boiling Point: Not determined because of non-volatile nature
Flash Point: Above 200°C (base oil, ASTM D92)
Solubility in Water: Insoluble
Vapor Pressure: Negligible
Density: 0.88 – 0.92 g/cm³ (at 20°C)
Viscosity: Thick, non-flowing at room temperature
Chemical Stability: Stable under recommended storage and handling conditions
Reactivity: No dangerous reactions known under normal conditions
Conditions to Avoid: Excessive heat, ignition sources, prolonged contact with strong oxidizing agents
Decomposition: May produce smoke, CO, CO₂, metal oxides, hydrocarbons at elevated temperatures
Incompatibilities: Strong acids and bases, oxidizers
Acute Toxicity: Low toxicity via dermal, inhalation, or oral exposure (LD50 typically above 2,000 mg/kg in animal tests)
Potential Effects: Prolonged/repeated skin contact may cause mild irritation, defatting, reddening
Eye Contact: Can cause mild transient irritation, usually reversible
Inhalation: Low hazard except in poorly ventilated areas with high mist
Carcinogenicity: Base oils highly refined, not expected to be carcinogenic
Mutagenicity/Reproductive Effects: Not expected to cause genetic or reproductive effects based on available data
Sensitization: Unlikely to sensitise skin
Aquatic Toxicity: Low solubility, limited acute aquatic toxicity; does not break down quickly in environment
Mobility: Non-mobile in soil, floats on water, risk of physical fouling for aquatic life
Biodegradability: Slow, persistent in environment
Bioaccumulation: Potential due to hydrocarbon ingredients, actual risk minimal under normal use
Other Information: Avoid uncontrolled release to environment, harmful to aquatic organisms if large quantities escape
Waste Treatment Methods: Follow local, regional, and national regulations
Disposal of Product: Use approved waste disposal contractors, reuse or recycle if possible
Disposal of Packaging: Empty containers may retain product residues, dispose as hazardous waste
Precautions: Do not allow to contaminate water, soil, drains; do not burn closed containers
UN Number: Not regulated
Proper Shipping Name: Not classified as dangerous goods
Transport Hazard Class: None
Packing Group: None
Marine Pollutant: No
Additional Transport Precautions: Follow general good transport practices, prevent leakage and spillage; store upright, avoid impact and rough handling
Regulatory Status: Not classified as hazardous under GHS or most country-specific chemical regulations
Labeling Requirements: Product labeling includes required safety advisories and first aid instructions
Inventory Status: Components listed on China IECSC, US TSCA, EU REACH, and other major inventories
Other Regulations: Occupational exposure limits for mineral oil mist must be followed in workplace settings; waste management to comply with regional, national, and international environmental regulations; product use must adhere to workplace safety plans
