Product Name: Sinopec Turbine Oil
Manufacturer: Sinopec Corp.
Recommended Use: Lubrication of turbine systems in power plants and industrial settings
Supplier: Sinopec Lubricant Company
Emergency Contact: +86 10 5996 6000
Product Codes: 32, 46, 68 (different grades)
Synonyms: Turbine Oil, L-TSA Series
Address: No.6, A Huixin East Street, Chaoyang District, Beijing, 100029, China
GHS Classification: Not classified as hazardous according to GHS
Health Hazards: Prolonged skin contact can cause dryness or irritation. Repeated inhalation of mists in poorly ventilated areas may cause respiratory issues, dizziness, or nausea.
Environmental Hazards: Large spills may threaten aquatic life and pollute waterways.
Physical Hazards: Oil can create slip hazards if spilled on floors.
Pictogram: No pictogram required in standard use.
Signal Word: None
Precautionary Statements: Avoid prolonged or repeated contact with skin and eyes. Do not ingest.
Other Hazards: Used oil can contain hazardous impurities formed during use.
Base Oil: Highly refined mineral oils, hydrotreated, concentration above 95%
Additives: Antioxidants, corrosion inhibitors, rust preventives, antifoam agents (<5%)
CAS Numbers: Base oil (64742-54-7 or 64742-65-0)
Hazardous Components: None above OSHA threshold; may contain trace levels of proprietary additives
Complex Substance: Blend of severally refined hydrocarbons and performance additives specific to turbine function
Inhalation: Move to fresh air, seek medical attention if symptoms persist. Avoid breathing mist.
Skin Contact: Wash with soap and water, remove contaminated clothing, seek medical help for irritation.
Eye Contact: Rinse immediately with plenty of water for at least 15 minutes; medical advice required if redness or pain continues.
Ingestion: Rinse mouth, do not induce vomiting, get emergency medical attention.
Notes to Physician: Treat symptomatically; medical observation recommended for accidental ingestion.
Suitable Extinguishers: Foam, dry powder, carbon dioxide, or water fog
Unsuitable Extinguishers: Water jet can spread burning liquid
Fire Hazards: Heated product emits irritating fumes, vapors may cause flash fires in confined spaces
Combustion Products: Carbon monoxide, carbon dioxide, sulfur oxides, smoke
Special Protective Equipment: Firefighters need self-contained breathing apparatus and full protective clothing
Other Instructions: Keep containers cool with water spray
Personal Precautions: Avoid contact with spilled material, wear protective gear including gloves and goggles
Environmental Precautions: Prevent entry into drains, waterways, or soil
Clean-Up Methods: Contain and absorb using sand, earth, or suitable inert materials. Use mechanical means for recovery or transfer.
Decontamination: Dispose contaminated soak-up material as prescribed by local rules
Other Information: Oil spills create slipping risk in work areas, warn those nearby
Handling Practices: Handle with care, avoid splashing, do not eat, drink, or smoke while working
Safe Storage Conditions: Store in closed, properly labeled containers in cool, ventilated places away from direct sunlight, ignition sources, or incompatible substances
Storage Temperature: Recommended between 0°C and 40°C
Incompatibilities: Strong oxidizers, acids, or alkaline agents can cause dangerous reactions
Special Hygiene Measures: Wash hands before breaks and after work, keep equipment clean
Exposure Limits: No established limit for base oil mist, but ACGIH recommends 5 mg/m³ for mineral oil mist
Engineering Controls: Use local exhaust ventilation in areas where oil mist or vapor arises
Personal Protection: Wear oil-resistant gloves, long-sleeved clothing, safety glasses or face shield when splashes possible
Respiratory Protection: Not required under normal use but apply approved mask if mist occurs
Eye Wash Stations: Keep readily accessible in work areas
Other Protective Equipment: Use boots and aprons if risk of large volume exposure is possible
Appearance: Clear, amber liquid
Odor: Mild petroleum
Density: Approx. 0.85-0.89 g/cm³ at 20°C
Boiling Point: >320°C
Melting/Freezing Point: < -10°C
Viscosity: Typically 32, 46, or 68 cSt at 40°C (grade dependent)
Solubility: Insoluble in water
Flash Point: >210°C (closed cup)
Autoignition Temperature: >330°C
Explosive Properties: Not explosive under normal use
Evaporation Rate: Negligible
Vapor Pressure: Very low at ambient conditions
Chemical Stability: Stable under recommended storage conditions
Hazardous Reactions: Avoid exposure to strong oxidizing agents; may react violently
Decomposition Products: Burning releases toxic gases including CO, CO2, sulfur oxides, and possibly trace hydrocarbons
Polymerization: Will not occur
Conditions to Avoid: Overheating, open flame, sparks
Corrosivity: Non-corrosive to standard metals
Acute Toxicity: Inhalation or ingestion unlikely to cause acute poisoning; large doses may cause gastrointestinal issues
Chronic Effects: Prolonged skin contact may lead to dermatitis or irritation. There is low risk for organ toxicity through occupational exposure.
Irritation: Contact with eyes or skin may cause redness or mild irritation; ingestion could upset stomach
Carcinogenicity: No recognized carcinogenic components in new product; used oil may present higher risks due to contaminants
Mutagenicity: No data indicating mutagenic risks
Other Routes: No special hazard in foreseeable industrial applications
Environmental Impact: Accidental release into water can threaten aquatic life due to persistent hydrocarbon chains
Degradability: Poorly biodegradable, tends to persist in soil and water
Bioaccumulation: Potential for accumulation within aquatic organisms is low to moderate
Mobility in Soil: Non-soluble in water, tends to bind to soil particles and sediments
Toxicity to Fish/Invertebrates: Can lead to long-term harm at high concentrations
Disposal: Prevent entry into sewer systems and open water bodies
Waste Treatment Methods: Collect in properly sealed containers for recycling or disposal
Recommended Disposal: Treat as hazardous industrial waste; follow local, regional, and national rules for used oil
Contaminated Packaging: Empty containers can hold residues; dispose per regulations
Avoid: Do not pour on the ground, into drains, or directly into the environment
Best Practices: Recover or recycle used product where facilities exist
UN Number: Not regulated under UN transportation rules
Proper Shipping Name: Lubricating Oil, Not Otherwise Specified
Hazard Class: Not classified as dangerous goods
Packing Group: None required
Labeling: Not required for normal shipping and handling
Road/Rail/Sea/Air: Safe to transport in drums, tanks, IBCs under standard safety protocols
Compliance: Meets Chinese, EU, and US oil safety regulations for industrial lubricants
Inventory Listings: Included on relevant chemical inventories such as TSCA, EINECS/ELINCS
Labelling Laws: No unique pictogram or hazard phrase mandated by GHS or OSHA
Additional Regulations: Used oil must follow hazardous waste rules where applicable; local disposal and safety standards must be followed in all regions
Worker Protection: OSHA worker right-to-know compliance applies; safety data sheet should be accessible in workspaces
